|
| |
   
Support
Bracket Feature
-
Specially
engineered, patented support hanger made from heavy duty .063 aluminum
metal with stiffening beads and gussets designed to enhance the
support of the gutter by cantilever action forcing the weight of the
gutter and genie against the fascia board.
-
Attaches
to the front lip of the gutter like a hidden gutter hanger requiring
no mechanical fastener.
-
Hangers
are installed at each end and center of each panel, approximately 3'
on center.
-
Hanger
and panel fasten under the second row of shingles with rust proof
screw. Leaf Genie extends under the top shingle approximately
3". This shingle seals itself to the top of the Leaf
Genie.
-
Radius
nose of hanger fits radius nose of the Leaf Genie panel.
-
Nose
of the Leaf Genie extends out past lip of gutter approximately 1/2
inch.
-
Provides
a neat, aesthetically pleasing appearance to your roof line.
-
End
cap totally encloses the gutter.
|
|
Hanger View
|
Bottom View
|
Panel Feature
-
Heavy
duty .027 gauge aluminum metal panels engineered with stiffening
beads, double hemmed radius nose with offset at one end to provide a
seamless appearance.
-
Panel
is designed to fit over existing 5" or 6" OG style (crown
molding design) extended under the second row of shingles. Can
be modified for other roof applications such as metal, slate, etc...
-
Panels
are manufactured out of baked on finish Alcoa aluminum metal available
in a wide variety of colors and 16 ounce copper to match and blend in
with the roof color.
-
Don't
worry about snow and ice loads. The Leaf Genie can take the
weight and fairs well when limbs or hail hits.
|
|
|
 |
|
|
